HS 3200 – BX Series Solvent-Free Silicone Roof Coating is a one-component, moisture curing silicone rubber roof coating system that is made with proprietary additives to deter wildlife damage on roofs. HS 3201 – BX Series is designed for use on existing smooth surface BUR, granulated cap sheet, well-adhered acrylic coating, concrete, metal, sprayed-in-place polyurethane foam, and various single-ply membrane roofing.
In most situations, our silicone adheres to the existing substrate without the need of a primer, saving you time and money.
Resistance to UV rays, ponding water, oxidation, wind-driven sand, rain, and snow, and temperature extremes allows our roof coatings to provide long-term protection. Because of our coatings’ high reflectivity, you can expect to save up to $.50 per square foot on your energy bill after installing a silicone roof coating.
Storage and Shelf Life: HS 3200 Series Silicone Roof Coating has a recommended shelf life of 24 months from the date of manufacture when stored in unopened containers between 40°F and 80°F. Refer to product packaging for date of manufacture.
Prep: Prior to starting your roofing project, prep the roof by power-washing, removing dirt and debris, and making any necessary repairs. Ensure roof is completely dry prior to applying silicone. For more detailed preparation instructions, view our Technical Resources page.
Mix: It is recommended that any silicone product be mixed with a drill mixer for ~5 minutes prior to application.
Application: The application rate and method for our Wildlife Deterrent Coating depends on the substrate you are restoring. Our Silicone Coverage Guide is a great tool to determine how much material you’ll need for the job and at what rate you need to apply it.
Equipment: Our Wildlife Deterrent Silicone should be applied via spray equipment (We recommend the Graco 933) or roll-applied using a medium nap roller.
Cure Time: Our Wildlife Deterrent Silicone cures in 1-4 hours under normal weather conditions and is tack-free in 1-2 hours. Because conditions vary, it is recommended that you exercise caution prior to walking on recently applied coating.
Weather Restrictions: To ensure optimum performance, it is recommended that you do not apply this product when surface temperatures are below 40 degrees. In cold-weather applications, material should be kept indoors until immediately before application. It is also recommended that you do not apply this material while rain is falling. Rain will not cause silicone to wash off, but the substrate will become wet and will negatively impact adhesion.
For more detailed application instructions, check out our installation specifications.