SUITABLE FOR USE ON:
Fabric, leather, textiles. Heat Activated Textile Seal & Coat creates an invisible, durable coating by chemically bonding to surfaces. Creates a water repellent, spill resistant, alcohol resistant, mold & mildew resistant, odor resistant surface and prevents unsightly stains.
Once applied the fabric coating maintains its protective properties on treated materials for up to 25 washes.
200-400 sq. ft. /gal (approximate). Coverage will vary depending on porosity and texture of surface.
FOR BEST RESULTS, VISIT WWW.NANOGLOBALTECH.COM FOR COMPLETE, DETAILED INSTRUCTIONS, APPLICATION OPTIONS AND SAFETY DATA SHEETS.
In the event of contact with skin, wash skin thoroughly with soap and water. Always wear safety goggles or splash shield to avoid splashing into your eyes. Do not wear contacts without eye protection. If sealer gets into your eyes, immediately flush eyes with water for 15 minutes. If eye irritation occurs after rinsing, seek medical attention, if accidentally swallowed, rinse mouth thoroughly with wáter and seek immediate medical attention.
IN CASE OF FIRE:
Use water fog, dry chemical, alcohol foam or carbon dioxide extinguisher.
ACCIDENTAL RELEASE MEASURES:
Absorb spill with insert material (dry sand or earth) then place in chemical container. Flush area with water to remove trace residue.
Store in a cool, dry place. Do not use empty containers for storing food or drinking water. Wash hands with soap and water before eating, drinking, smoking, applying cosmetics, or using toilet facilities. Keep container closed when not in use. Keep out of the reach of children. Use respiratory protection when misting or spraying. Avoid contact with skin and eyes. Avoid breathing vapor and spray mist. Provide ventilation with fresh air exhaust in work area. OSHA 1910.134 and ANSI Z88.2.
Not tested for allergens.
SURFACE PREPARATION INSTRUCTIONS:
Surface must be clean, dry and in sound condition.
Recommended: Due to the wide variety of substrates, always test NGT Textile & Fabric in an inconspicuous location to ensure compatibility. Stir or vigorously shake NGT Textile & Fabric well to re-suspend nanoparticles, as there will be settlement of nanoparticles in the bottom of the container. Re-stir contents at least every 10 to 15 minutes during the application process to re-suspend nanoparticles and ensure proper performance.
Best results have been achieved by saturating fabric, and heating to 140F degrees, and maintaining that temperature for 15 minutes.
DIPPING; Textile & Fabric is best applied by saturating the intended fabric in coating using a dipping method. Once saturated, heat fabric up to 140F degrees. Once heated to 140 F degrees , maintain temperature for 15 minutes until water is completely evaporated.
Spray intended fabric until saturated. Once fully saturated, heat fabric to 140F degrees, maintain temperature for 15 minutes until water is completely evaporated.
Clean tools and equipment with water and rinse thoroughly.
CARE & MAINTENANCE:
NGT Textile & Fabric lasts for up to 25 washes. Reapply as needed to maintain protective properties.
WATER BASED PRODUCT
This product does not pose any harmful effects when used according to manufacturer’s instructions.
LIMITED TIME WARRANTY:
NGT guarantees this coating to be defect free. Any material that is proven to be defective will be replaced in a like quantity by the manufacturer within 5 years of date of purchase. Seller will provide 100% replacement for product found to be defective for 2 years from the date of purchase, then prorated each of the remaining 3 years. Seller must be provided with:
• Proof of purchase receipt.
• Evidence that product has been applied according to the instructions on the container, the data sheet, and instructions and guidelines posted at NanoGlobalTech.com.
• Supporting materials and access to the property for inspection and testing as requested by Seller.
This Warranty is non-transferable. This warranty is given in lieu of all other warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose.
The remedy stated herein is an exclusive remedy and Seller shall not be responsable for any other damages, including labor or any incidental, consequential, special or punitive damages, whether based on breach of express or implied warranty, negligence, strict liability or other legal theory.