NGT Coatings Polished Stone Sealer is a clear, breathable, waterborne sealer designed for use on interior polished natural stone surfaces. The sealer makes a long lasting barrier that provides superior resistance to water and stains.
NGT Coatings Polished Stone Sealer is ideal for polished granite, marble, onyx, quartz, limestone, travertine and serpentine.
NGT Coatings Polished Stone Sealer protects surfaces against moisture and stains.
Vehicle type: Water based
Flash Point: N/A
VOC: Zero g/L
Weight pero Gallon 8.251 lb/gallon
Polished Granite and Marble: 500-800 sq ft/gal.
Coverage will vary depending on the porosity and texture of the surface.
IMPORTANT: Remove All Silicone Sealers.
Surface must be clean, dry, and in sound condition. Remove all oil, dust, grease, dirt and other foreign material. Clean with NGT Coatings Surface Prep. Rinse with clean fresh water and let dry.
Due to the wide variety of surfaces, always test NGT Coatings Polished Stone Sealer in an inconspicuous location to ensure performance. There should be very little to no enhancement or change in appearance to the existing surface after it has dried.
Make certain surface has been prepared properly and is clean and dry. If applying outdoors, make certain the ambient temperature is between 45°F and 105°F, 90% RH or less, and there is no chance of rain for a mínimum of 5 hours after the estimated time of completion of the sealing process. Take necessary precautions against natural elements. Protect surfaces that may need to be repainted, as it will affect the bond of the new paint. NGT Coatings Polished Stone Sealer will not harm hazardous chemicals into the soil or water, however as a general rule, it is best to wipe off overlaps or spills as they occur.
Shake NGT Coatings Polished Stone Sealer container for several minutes to re-suspend the nanoparticles that have settled to the bottom. Make certain to re-shake every 15-20 minutes to ensure proper performance.
Use a soft terry cloth type towel to apply (do not use a sponge as this will draw the sealer into the sponge and not allow it to penetrate into the stone). Pour a liberal amount of the sealer onto the surface and in a circular motion with downward pressure, begin to work the sealer into the surface of the stone with the terry towel. In an effort to force the sealer into all the small pores of the Stone. Keep working the sealer in until the stone will not absorb anymore.
Wait 10 minutes and repeat this process until all the sealer is absorbed. Wipe off any excess sealer and let dry. Do not get wet for 24 hours. Allow 7 days for the sealer to cure completely.
Drying time (@ 77° F, 50% RH)
Temperature and humidity dependent.
Dry to touch: 1 hour.
: 3-5 hours.
Full Cure:7 Days.
LIMITED TIME WARRANTY:
NGT Coatings guarantees this product to be defect free. Any material that is proven to be defective will be replaced in a like quantity by the Manufacturer within 1 year of date of purchase. Seller will provide 100% replacement product for 1 year from the date of purchase. Seller must be provided with:
• Proof of purchase receipt.
• Evidence that it has been applied according to the instructions on the container, the data sheet, and instructions and guidelines posted at www.NanoGlobalTech.com.
This warranty is non-transferable. This warranty does not cover wear and tear of the substrate, only the product itself. Any warranty claim must be made in writing and sent to Seller with proof of purchase receipt, supporting materials, access to the property for inspection and testing as requested by Seller. Seller will thereafter provide a 100% replacement product. This warranty is given in lieu of all other warranties, express or implied, including any warranty of merchantability or fitness for a particular purpose. The remedy stated herein is an exclusive remedy and Seller shall not be responsable for any other damages, including labor or any incidental, consequential, special or punitive damages, whether based on breach of express or implied warranty, negligence, strict liability or other legal theory.